
Add to Cart
100 W UFO Grow Light with High PF Value IP for Flowers and Vegetables Warm Shed
Description:
1. AC voltage 85-265V input direct
2. Various R/B ratio available:4:1~8:1
3. 3030 LED Chip
4. Power factor higher than 0.9
5. THDI:<18%
6. IP65
7. Beam angle:60°/90°/120°
Specification:
Input Voltage | 85-265V | |||
Frequency range | 50/60HZ | |||
Power | 100W | 160W | 240w | |
THD | <20% | |||
Power Factor | >0.9 | |||
Power Efficiency | >90% | |||
Working Voltage | 36V | 36V | 42V | |
Led | 150pcs | 200pcs | 360pcs | |
PPFD(μmol/㎡s) @H=1meter | 30 | 40 | 60 | |
R660:B450 | 4:1-8:1 | |||
wavelength | Blue:450nm Red:660nm | |||
Junction Temperature | ≤120° | |||
Working Temperature | -40°~+55° | |||
Storage Temperature | -25°~65° | |||
IP Grade | IP65 | |||
Net weight | 5KG | 7KG | 10KG | |
Packing Size:(mm) | 350*350*30 | 450*450*35 | 560*560*40 | |
Working Life-span | 30000hours | |||
Power Line | 3*1mm² | |||
Connect wire | Brown | L | ||
Blue | N | |||
Yellow/Green | G | |||
color | Black |
Mounting height: 1m above ground - 100W PPFD(μmol/㎡s) XY(Distance from center-m)
X Y PPFD |
-1.2 |
-0.9 |
-0.6 |
0.3 |
0 |
0.3 |
0.6 |
0.9 |
1.2 |
-1.2 | 2.44 | 2.74 | 4.31 | 5.28 | 7.425 | 6.71 | 4.05 | 3.425 | 2.28 |
-0.9 | 3.61 | 5.19 | 7.815 | 9.745 | 13.72 | 10.81 | 7.365 | 5.67 | 3.93 |
-0.6 | 4.67 | 8.45 | 11.55 | 16.28 | 18.42 | 16.79 | 12.18 | 8.825 | 4.725 |
-0.3 | 4.89 | 9.12 | 13.32 | 20.66 | 24.11 | 21.85 | 12.83 | 9.855 | 4.84 |
0 | 5.43 | 10.16 | 14.32 | 22.81 | 27.87 | 22.34 | 13.78 | 9.92 | 5.24 |
0.3 | 4.81 | 8.68 | 12.92 | 20.12 | 24.44 | 21.45 | 13.38 | 9.37 | 4.86 |
0.6 | 4.57 | 7.735 | 10.77 | 15.20 | 17.94 | 16.28 | 11.37 | 8.225 | 4.65 |
0.9 | 3.41 | 4.93 | 7.13 | 9.315 | 13.13 | 9.97 | 7.675 | 5.12 | 3.275 |
1.2 | 2.29 | 2.6 | 3.775 | 5.21 | 6.92 | 6.15 | 4.435 | 2.72 | 2.2 |
Product picture:
Application:
1. Flowers and vegetables warm shed
2. Greenhouse
3. Seeding of growth room
4. Nurseries
5. Home& urban garden
6. An university research etc.
Safety Information
1. The LED module and all its components shall not be subjected to mechanical stress
2. Correct electrical polarity, otherwise module may be damaged
3. Ensure the power supply is suitable for the total load.
4. Electrostatic Discharge (ESD) precautions shall be incorporated when handling or installing the module.
5. Installation of LED modules shall refer to all applicable electrical and safety standards.
6. Suitable for luminaire of protection class 1, grounding is mandatory to comply with safety standards
7. The AC light engine needs to be mounted to a heat sink with a thermal interface material between them
8. It is better to use the AC led module with safety cover
9. Modules may be hot to touch. Use caution when handling.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, we offer 2-5 years warranty to our products.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
Contacts: